Proceed CVP2 Manual do Utilizador descarregar pdf (Página 31)

Specifications

■ Pass-through gain: +0.0 dB, - 0.2 dB

■ Pass-through frequency response: +0.25 dB, - 3.0 dB to 70 MHz

■

Pass-through differential gain: less than 0.2%

■ Pass-through differential phase: less than 0.2°

■ Decode/encode path gain: ±0.2 dB

■ Decode/encode path frequency response:

Composite & S-video inputs +0.2dB, -1.0 dB to 5.0 MHz

Component inputs +0.2dB, -0.5 dB to 5.0 MHz

■ Decode/encode path differential gain:

To Composite output less than 2%

■ Decode/encode path differential phase:

To Composite output less than 1°

■ Decoder composite input filter: 4 line adaptive comb filter

■ Composite & S-video inputs: NTSC or PAL, autodetecting

■ SD Component YPbPr inputs for decoding: SMPTE standard levels

Y channel -300 mV sync, +700 mV peak

Pb/Pr channels ±350 mV

Field rate 50 or 60 Hz interlaced, autodetecting

■ SD Component RGsB inputs for decoding:

G channel -300 mV sync, +700 mV peak

B/R channels +700 mV peak with or without sync

Field rate 50 or 60 Hz interlaced, autodetecting

■ Maximum input signal offset, all inputs: ±2VDC

■ Input impedance, all inputs:75Ω

■ SD encoded YPbPr output levels: SMPTE levels

■ SD encoded RsGsBs output levels:

w/60 Hz input -286 mV sync all channels, +714 mV peak

offset +337 mV

w/50 Hz input -300 mV sync all channels, +700 mV peak

offset +352 mV

■ Output impedance:75Ω

■ Crosstalk: better than -55 dB @ 10 MHz

better than -45 dB @ 35 MHz

■ RS-232 “to controller” port:

Baud rate 38.4 kbaud

Data bits 8

Parity None

Stop Bits 1

Data format AVP2 ASCII commands only

(see AVP2 documentation)

Pinout Tx=pin 3

Rx=pin 2

Ground=pin 5

(continued next page)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Comentários a estes Manuais

Sem comentários

Proceed CVP2 Manual do Utilizador Página 31

Comentários a estes Manuais

Manuais e produtos relacionados com Recetores e Amplificadores Proceed CVP2